|
|
| Author |
Message |
lukeeep
Not So Newbie
Joined: 10 Jun 2008
Posts: 5
Location: chandler,az
|
 Posted: Wed Jun 11, 2008 3:56 pm Post subject: price to replace all 4 output modules |
 |
|
| ive got the marshall mode 4(MF350) and all 4 output modules need to be replaced. How much dough am i going to have to fork out for this?where is the best place to purchase these modules? |
|
| Back to top |
|
 |
russ@savage
Growing Guppy
Joined: 10 May 2008
Posts: 40
Location: Minnesota
|
| Posted: Wed Jun 11, 2008 4:23 pm Post subject: |
|
|
| I'm pretty sure you're gonna have to take it to an authorized repair center. You may be able to find after market IC amps, but then you have to de-solder 15 little pins on all four little boards. (Yuck.) And the traces have a tendency of coming off if you are not REALLY careful. Like I told you, they are gonna run about $50 each with shipping. This is NOT a repair that should be done by yourself unless you are an experienced tech. |
|
| Back to top |
|
|
lukeeep
Not So Newbie
Joined: 10 Jun 2008
Posts: 5
Location: chandler,az
|
| Posted: Wed Jun 11, 2008 5:20 pm Post subject: |
|
|
| russ@savage wrote: | | I'm pretty sure you're gonna have to take it to an authorized repair center. You may be able to find after market IC amps, but then you have to de-solder 15 little pins on all four little boards. (Yuck.) And the traces have a tendency of coming off if you are not REALLY careful. Like I told you, they are gonna run about $50 each with shipping. This is NOT a repair that should be done by yourself unless you are an experienced tech. |
yeah, i took it in yesterday to a repair center, but i just wanted get a little more knowledge about this to make sure i don't get ripped off. I wouldnt try doing this by myself i dont have enough knowledge. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
