AmpTalk.com

[tw001_tw]

I'm getting ready to build a stereo power amp.
(Actually my goal is to finish it before the fall)
Using 1 PT and 2 OT's. Similar to this one:
http://hoffmanamps.com/projects/StereoPowerAmp1.htm
But using 2 6L6's per channel in a Fender fashion instead of the
el84's in a Marshall fashion.
I'm considering using this schematic as a starting place for my design.
http://www.ampwares.com/ffg/schem/bassman_10_schem.gif
Or anather one I have that is of a bassman version which is very similar.

Here is my question. What do I have to do or calculate to make sure
the PT can handle all the power tubes (amp rating on high voltage sec.
is what I'm more concerned about - but if there is something else, let me
know of that too.) Any suggestions/thoughts/ideas/etc. on which PT to use?

Again, this is going to be a months long project, and if I stay on the ball,
I'll update this thread as progress continues.
-tw

[genusled]

All I can say is good luck. Just keep me posted with the progress of your project.



________________
Arnie
McIntush MA6500 Integruted Amplifier - Get the MA6500 Integrated Amplifier