AmpTalk.com Forum Index AmpTalk.com
Amplifier Forum
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Marshall JCM800 2204 Impedance selector



 
Post new topic   Reply to topic    AmpTalk.com Forum Index -> British Amps
Author Message
fm2006
Newbie Alert
Newbie Alert



Joined: 19 May 2006
Posts: 2
PostPosted: Fri May 19, 2006 7:05 pm    Post subject: Marshall JCM800 2204 Impedance selector Reply with quote
Hi all. My first post here, so be gentle:)

I have a Marshall JCM 800 2204 head and the impedance selector only has markings for 4 and 8 ohms. Is that normal? I though that the allowed combinations were 4, 8 or 16 ohms since Marshall cabs are usually 16 ohms.

I have a mono 16 ohm cab that I want to use with the head but I don't want to damage the amp by running it the wrong way. I understand that it should be safe to run it while the impedance selector is set to 8 ohms but that is not ideal.

Any one know why Marshall did this?

Any help is appreciated.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    AmpTalk.com Forum Index -> British Amps All times are GMT - 8 Hours
Page 1 of 1

 

© 2001-2007